HPA conversion kit for Bolt Action sniper rifles. Compatible with VSR 10 models and the Echo1 M28. Testing is in process for other sniper models as well.
*System requires a 7.4v LiPo battery (not included in package)
Compatibility:- Tokyo Marui VSR 10* (CYLINDER IS REQUIRED)
- Echo1 PSR 10* (CYLINDER IS REQUIRED)
- JG Bar 10 (CYLINDER IS NOT REQUIRED, BUT RECOMMENDED)
- Echo1 M28 (CYLINDER NOT COMPATIBLE, USE STOCK CYLINDER)
- Cybergun FN Herstal SPR (CYLINDER IS NOT REQUIRED, BUT RECOMMENDED)
WARNING: Many different brands and gun variants claim to be VSR compatible, but have small differences which can cause compatibility issues with our system. If you do not see your gun listed under the "Compatibility" section, please contact us or your local retailer for assistance before purchasing.
*Stock cylinder used in this gun has different threads that are not compatible with the included cylinder head. We strongly suggest using our offered cylinder, however a compatible cylinder head is available from us upon special request.
A few technical highlights from the BOLT:
* Electro pneumatic: This means there will be a small battery, but NO
FCU. The trigger simply attaches to the outside of the trigger box and
is actuated by the trigger. When actuated it powers the valve and fires
the bb. This means the consistent output of a solenoid without the
complexity and battery drain of an FCU.
* Exclusive 3-way valve design created by Wolverine Airsoft and
manufactured by MAC powers the system.
* NO MOVING PARTS: During the firing of the bb nothing in the system
moves other than the Solenoid Valve opening.
* Patent Pending Air Saver™ Technology: Allows you to
simultaneously save up to 50% of your air per shot and match the volume
air output of the system to the barrel.
* Optional 1 Piece aluminum bolt simplifies the installation
especially on guns where the cylinder head is pinned to the cylinder.
* Will have the option of using a special version of our WRAITH for self-contained co2 cartridge use with no external air line. ~150 shots per cartridge is possible even at 2+Joules!
* Input pressure(subject to change): 80-180psi.
* Output Energy: 1-4+J depending on setup and bbs used
Suggested tools:
- Drill
